Testing Tool for Board written.

main/firmware/config.h

@@ -0,0 +1,123 @@
+#ifndef Config_h
+#define Config_h
+
+
+// Include Configuration
+// If you don't want a feature, switch it of with a '0'
+#define USE_SDCARD 1
+#define USE_LCD 1
+#define USE_AXEFX 1
+
+
+// ============== Pin Configuration ==============
+//
+// LCD-Pin Definitions
+#if USE_LCD==1
+  #define LCD_D7 44
+  #define LCD_D6 45
+  #define LCD_D5 46
+  #define LCD_D4 47
+  #define LCD_E  48
+  #define LCD_RS 49
+#endif
+
+
+// SD-Card-Pin Definitons
+#if USE_SDCARD==1
+  #define SDC_MISO 50
+  #define SDC_MOSI 51
+  #define SDC_SCK 52
+  #define SDC_CS 53
+#endif
+
+
+// LED und Switch Pins
+#define SWT01 2
+#define LED01 3
+#define SWT02 4
+#define LED02 5
+#define SWT03 6
+#define LED03 7
+#define SWT04 8
+#define LED04 9
+#define SWT05 10
+#define LED05 11
+#define SWT06 12
+#define LED06 13
+
+#define SWT07 22
+#define LED07 24
+#define SWT08 26
+#define LED08 28
+#define SWT09 30
+#define LED09 32
+#define SWT10 34
+#define LED10 36
+#define SWT11 38
+#define LED11 40
+
+#define SWT12 23
+#define LED12 25
+#define SWT13 27
+#define LED13 29
+#define SWT14 31
+#define LED14 33
+#define SWT15 35
+#define LED15 37
+#define SWT16 39
+#define LED16 41
+
+#define SWT17 42
+#define LED17 43
+#define SWT18 A8
+#define LED18 A9
+#define SWT19 A10
+#define LED19 A11
+#define SWT20 A12
+#define LED20 A13
+#define SWT21 A14
+#define LED21 A15
+
+#define SWT22 A6
+#define LED22 A7
+#define SWT23 14
+#define LED23 15
+
+// Not used if you have SD-Card
+#if USE_SDCARD==0
+  #define SWT24 16
+  #define LED24 17
+  #define SWT25 20
+  #define LED25 21
+  #define SWT26 50
+  #define LED26 51
+  #define SWT27 52
+  #define LED27 99
+  #define SWT28 53
+  #define LED28 99
+#endif
+
+
+// Expression-Pedal Pins
+#define EXP01 A0
+#define EXP02 A1
+
+// Layer-LEDs
+#define LAY_LED01 A2
+#define LAY_LED02 A3
+#define LAY_LED03 A4
+#define LAY_LED04 A5
+
+
+
+
+// ============== Standard Board Configurtation ===============
+//
+// ...will be overwritten by SD-Card Config if you use SD-Cards!
+//    If there is no SD-Card or SD-Card-Config-File present
+//    it will use the Standard Configuration!
+//
+
+
+
+#endif